Knowledge Base - UPTEQ NFC: SIM Editor Quick Guide

This article applies to the following products

Working with SMAGT100NFC2FF/3FF/4FF cards

SMAGT100NFC is an UPTEQ card type in our SMAGT series that contains ready-to-use NFC test apps and several telecom applications like USIM, ISIM and CSIM.

Open profile

 media 1

The first step after starting SIM Card Editor is to choose your profile, in this case NFC UpTeq.
Under File go to Open default, and choose NFC UpTeq.

Authentication keys

media 2

Let's start with the box.
1. First you choose your algorithm. NFC UpTeq supports both Milenage and XOR.
2. Edit your Ki and OPc (XOR do not use OPc), either by choosing one of the pre-existing ones or inserting them yourself.
If you want ISIM don't forget to check the "Include ISIM Auth Keys" box.
3. Here you choose if you want GPIN disabled or not, or if it's already disabled check that box.
4. If you want dynamic ICCID check the box and fill out your value.

Editing files

 media 3

On the left-hand side you have a list of files. The first one we'll edit in this guide is IMSI, 6F07.


 media 4

When editing IMSI you can choose to do it in binary mode or interpreted mode. (Some files cannot be edited in Interpreted mode.)
Enter your IMSI value, and if you can a range check the box and choose the amount of cards.
Once you are done click ADD to Script.


media 5 

Open the next file you want ot edit, in this case MSISDN, and enter in your value. As with IMSI, if you want a range check the box.
When you're done click ADD to Script.


media 6 

Continue with your editing. If you want to edit SPN, Service Provider Name, fill out the name you want, and in case you want a dynamic number after, check that box and either provide the numbers you want or click "Last 4 IMSI". Proceed to click ADD to Script as usual.

ISIM configuration

media 7 

Now we are moving on to the ISIM application.
Here we are editing IMPI. As always, first fill out the value you want. Secondly, you have a few options. If you want the information to be dynamic you check the "Insert dynamic value" box and then proceed to choose either IMSI, MSISDN or a value of your own choice.
Note: If you want the value to be dynamic you have to click where you want it.
Once done click Add to Script.


media 8 

Continue editing your files by entering in your values then click Add to Script.


media 9 

With IMPU you edit it just like you did with IMPI. The only difference is IMPU has several tabs. Choose the tab you want and enter in your values. After entering your value, click ADD to Script, then proceed to edit another tab if you want.
You can choose dynamic values, just like you did with IMPI.

Create script

 media 10

Once you are done editing your files, you create the script in the menu, under Script -> Make script.

Check parameters

media 11 

A window will pop up with your information you have entered. Double-check to make sure everything is in order, then click OK.
If something is not accurate, click Cancel and go back and edit the file/s.

Name project

media 12 

Enter in a name for your project, whatever you find suiting. Then choose where to save it.


Created : 2017-06-13 10:43:08, Last Modified : 2017-06-13 10:59:13